+
  • 泳池热回收除湿三用一体机2.jpg

Swimming Pool Heat Recovery & Dehumidifier 2

·

·

·

Scope of use:

Details

Product Features

◆ Multi-functional integrated integration: space cooling, heating, dehumidification, ventilation, pool water heating.

◆ Air distribution: three integrated dehumidification heat pump equipment using continuous air recirculation, using a good air distribution system to ensure that the pool indoor air temperature and humidity uniformity. In order to ensure that the air temperature and humidity meet the specified control requirements, indoor swimming pools must ensure adequate air flow and air distribution. The equipment must extract the humid indoor air through the recirculating air system, and after dehumidification and temperature adjustment, release it to the indoor through the air supply system.

◆ Pool water thermostat system: the daily pool water thermostat is maintained by the heat pump through the recycled heat, and supplemented by the boiler or air source heat pump or electric heater when the pool water temperature requirement cannot be met; the initial heating of the pool water is completed by the boiler or air source heat pump, and the heating system is connected in parallel with the three-in-one thermostatic and dehumidifying heat pump unit, and the pool water thermostat is operated with full-automatic control.

◆ Hot and cold water coils: In order to fully save energy, in winter, due to the low initial temperature of the pool room, such as the use of dehumidification heat pump heating, it will take longer and consume more energy. At this time, the existing hot water source can be used to rapidly warm up the indoor air through the hot water coil in the dehumidification heat pump machine without installing a heater in the air duct system. In summer, you can choose the heat pump machine hot and cold water heat exchanger using 7-12 ℃ chilled water direct access to dehumidification, the use of chilled water on the indoor air temperature and humidity control.
◆ Anti-corrosion and durable: air-cooled heat exchanger fins can be electrophoresis, copper fins or hydrophilic pure epoxy anticorrosive treatment, can be done C5-H anticorrosive level, water-cooled heat exchanger using titanium tube alloy, effectively resisting chlorine ions in the water erosion.

◆ Convenient control, stable performance: the use of new touch-screen buttons and Chinese dot-matrix multifunction controller, able to independently control the temperature and humidity, a variety of modes of automatic switching; the key components are selected from domestic and foreign well-known brand products.

◆ Smooth drainage: the unit built-in stainless steel dry water pan and double-stage drainage measures to avoid the unit wall water accumulation, hide water, at the same time, it will be clean and sweep the water, to avoid hiding dirt and scale;

◆ Safe and environmentally friendly: the use of environmentally friendly refrigerants to protect the ozone layer.

Immediately Consult

If you are interested in our product, please leave your email and we will contact you as soon as possible. Thank you!

Security verification
Submit

Related Products