+
  • 防爆空调3(1).jpg

Explosion-proof air-conditioning 3

·

·

·

Scope of use:

Details

Product Features

◆ According to the specific requirements of the use of the occasion, explosion-proof air conditioners can be widely used in petroleum, chemical, metallurgical, pharmaceutical and other industries where there exists or may exist ⅡA, ⅡB, ⅡC class, T1 ~ T4 groups of combustible gases, vapours and air mixed with the formation of explosive gas mixtures of the 1 ~ 2 zone occasions.

◆ In the structure, the use of source isolation type, intrinsically safe, pouring sealed composite anti-drying technology, the control side of the control by the intrinsically safe, does not produce any electrical sparks, easy to use and safe, the use of high-efficiency multi-fin heat exchanger, the refrigerant through the contact with the air is more fully, can significantly improve the cooling and heating effect of air conditioning.

◆ In the material, explosion-proof air conditioning is mainly because it contains aluminium alloy explosion-proof material, the material stacked in the mesh will form a honeycomb structure, which will be the container cavity is divided into many "small compartments with". This "small compartment" can be very good to prevent the spread of flame, so it can play a good role in heat insulation. At the same time, this honeycomb structure has a high efficiency of surface area per unit volume, which has excellent thermal conductivity, and can quickly absorb most of the heat released by the combustion, so that the temperature after the amount of burning reaction is greatly reduced, the expansion of the reaction gas is greatly reduced, and the pressure value of the container has not been greatly increased.

◆ With the rapid development of electronic technology, electronic equipment is more powerful, running faster and faster, while the cabinet designed for explosion-proof air conditioning has become smaller. Therefore, the denser the arrangement of electronic components in the cabinet, the greater the heat dissipation per unit volume of the cabinetup. If the heat is not discharged in a timely manner, the temperature of the electronic components and the surrounding environment will gradually increase, thereby shortening the service life of the explosion-proof air conditioning. When the ambient temperature of the components exceeds 65, the equipment is likely to fail, so try not to use explosion-proof air conditioning in the case of high temperature. Explosion-proof air conditioners not only have requirements for temperature, but also for humidity. If the relative humidity is too low, the machine room will produce strong static electricity, resulting in explosion-proof air conditioning can not run, so the humidity should be controlled between 45-65 per cent.

Immediately Consult

If you are interested in our product, please leave your email and we will contact you as soon as possible. Thank you!

Security verification
Submit

Related Products