+
  • 组合式风柜1.jpg

Combined air locker 1

·

·

·

Scope of use:

Details

Product Features

◆ Unique three-dimensional composite aluminium alloy cabinet frame junction, with the latest composite sandwich double-layer thermal insulation panel, so that the latest generation of units

◆ The cabinet has a real sense of the ground cold bridge and learning leakage design. Avoiding the energy loss and the phenomenon of doubt on the outer wall of the unit caused by the bridge and the leakage of the port, and eliminating the infiltration of the untreated air into the system.

◆ According to ZBJ72027-89 international push determination, the cabinet appearance without condensation; According to GB/T14294-93 standard determination, the cabinet air leakage rate of "1% flat and smooth set of internal wall design, convenient for internal cleaning, reduce the air on the move and kinetic energy loss, effectively inhibit the accumulation of dust and bacterial growth.

and bacterial growth. The internal function partitions are all isolated by wind-blocking boards, eliminating the airflow from the area.

◆ Flexible shape and flexible production, easy for customers to make personalised door remedies and make the most effective use of building space.

◆ Convenient access doors and removable panels provide an open access space for all internal components.

◆ The base adopts the galvanised plate bending forming the whole welding shape, and the box body adopts the threaded connection, the height of the base ≥ 80m according to the water seal away from the degree and the project actually need the foundation away from the degree of the size of the requirements can be set KanZa away from the degree. The middle of the base according to the components in the bottom of the load-bearing needs, for the middle beam of the longitudinal and transverse layout. The uniform load-bearing of the base and the installation ground of Lihall improves the structural strength of the unit as a whole, ensures smooth internal installation and safe maintenance, and is conducive to reducing the vibration of the unit.

◆ The frame of the unit adopts assembled structure, which is composed of unique three-dimensional composite Silanqiao alloy profiles. The aluminium alloy profiles are made of high-quality T6 alloy extruded by fixed die, and the surface is treated with hardening and dense sand, so that the unit is excellent in terms of strength, accurate in dimensions, and beautiful in appearance; and the anodized protective film on the surface layer of the aluminium makes the appearance better, and is more thankful for the corrosion.

Inner and outer aluminium alloy profiles use unique nylon profiles to isolate the cold bridge, and filled with direct vapour more quality high-density polychlorinated ester thermal insulation materials, further enhance the thermal insulation properties and machine strength, the box strength in line with the European EN1886-1998 standard, up to the level of 2A; frame angle using 3D plastic and aluminium castings, and aluminium alloy profiles are assembled into a whole frame, the mechanical strength of the mechanical strength of the European CEN2-level standards (used under design conditions). The mechanical strength meets the European CEN2 standard (used under design working conditions, the deformation is less than 4mm/m).

◆ Panel by the new 30-50mm thickened composite sandwich double-layer insulation panel by the colour steel, galvanized sheet and the middle of the rigid polyurethane insulation material overall foam forming, the side cabinets using VC board edge strips to isolate the double-layer plate and the cold bridge between the silver cabinets frame; in the heat preservation, acoustic, fire prevention, strength, service life, as well as cleanliness and so on, all have the best performance. The heat transfer coefficient of the panel is ≤0.02WWm.k. The fireproof performance of the panel meets the requirement of CSTBM1 fireproof grade.

◆ Large air volume, large wind pressure and large size of the unit positive angle pressure service door adopts slanting surface paste structure, there is a hidden pressure the tighter the air pressure convergence results. The collar tightening mechanism of the access door adopts two levels of adjustable tightening; the panel installation on the aluminium alloy gold frame simultaneously adopts two processes of internal screw fastening and external pressure strip fastening, which makes the strength and flatness of the box body and the airtightness better.

Immediately Consult

If you are interested in our product, please leave your email and we will contact you as soon as possible. Thank you!

Security verification
Submit

Related Products